Tilta Nucleus-Nano Wireless Focus Control System with the Nucleus-Nano Motor to wirelessly control the focus of most DSLR, mirrorless, or cine-style lenses.
The large Hand Wheel responds with no delay as it wirelessly controls the separately available Nucleus-Nano motor from up to 300' away via 2.4 GHz Wi-Fi, and it lasts up to six hours on a single 3.7V 14500 lithium-ion battery. You can also perform run/stop functions and set hard A and B limits with the buttons on the wheel for more control over your camera and lens.
The Hand Wheel is constructed with aluminum, plastic, rubber, and a sleek rosewood-lined handle for comfort and style. It can mount on a stand, rig, or gimbal such as the Gravity G2X with a rosette connector. One 14500 lithium-ion battery is included with the Hand Wheel.
Wireless focus wheel for DSLR, mirrorless, or cine-style lenses
Large, rosewood-lined wheel for style and comfort
Connect wirelessly to Nucleus-Nano motor from up to 300' line-of-sight range via 2.4 GHz Wi-Fi
Powers via 14500 lithium-ion battery for 6-hour operating time
Use start/stop function and set A/B limits with buttons on controller
Connects to rigs, arms, or gimbals with a rosette mount
Compatible with Nucleus-Nano Focus motor
Tilta Nucleus-Nano Wireless Lens Control Motor Pair this Nucleus-Nano Lens Control Motor from Tilta with the separately available Nucleus-Nano Focus Hand Wheel or Nucleus-M FIZ unit to wirelessly control the focus of most DSLR, mirrorless, or cine-style lenses.
The motor comes with a standard 0.8 MOD cine lens gear, operates at up to 1Nm of torque, and can connect wirelessly to the Nucleus-Nano Focus Hand Wheel from up to 300' away. The motor calibrates to your lens automatically, but you can choose to calibrate manually. You can also perform run/stop functions and set hard A and B limits with the buttons on the Hand Wheel for more control over your camera and lens. The motor is also compatible with the Nucleus-M FIZ hand unit and handgrips.
The motor draws power via a 5-18V micro-USB port from a gimbal or D-Tap battery with a separately available cable. The motor is constructed with aluminum, plastic, and stainless steel for durability. It can mount on a stand, rig, or gimbal with its built-in 15mm rod clamp.
Note: Use only run/stop cables specifically designed for the Nucleus-Nano; Tilta wooden handle run/stop cables are not compatible or safe to use with this unit. All cables are available separately.
Wireless focus motor for DSLR, mirrorless, or cine-style lenses The low-noise 5-18V motor operates with 0.65 to 1 Nm of torque Includes a 0.8 MOD, 32 pitch, 26-tooth cine standard gear 300' wireless range to connect to lens controllers Powers via micro-USB from D-Tap battery or gimbal with a separately available 5V cable Use start/stop function and set A/B limits with buttons on the Hand Wheel Connects to rigs, gimbals, and rods with a built-in 15mm rod clamp Compatible with Nucleus-Nano Focus Hand Wheel Controller, Nucleus-M FIZ hand unit, and Nucleus-M handgrips
Tilta Baseplate with 15mm LWS Rod Clamp for 95mm Lens Diameter Attach this Tilta Baseplate with 15mm LWS Rod Clamp to the base of your camera and attach a separately available 15mm rod to the rod clamp. The Nucleus-Nano motor can then attach to the rod and provide focus control. The size of the plate and the spacing of the rod clamp are designed to place your motor gear against the focus gear of lenses with a 95mm diameter.
Tilta Nucleus-Nano Handwheel Attachment Plate for DJI Ronin-S/Gravity G2X Attach your Nucleus-Nano handwheel to a Gravity G2X or DJI Ronin-S gimbal with this Nucleus-Nano Handwheel Attachment Plate from Tilta. The adapter attaches to the Ronin-S with one of the gimbal's M4 screws, and it attaches to a rosette on the Gravity G2X with the included M6 screw. When attached to the gimbal, the handwheel slides into the plate and is tightened with the locking lever.
Tilta Nucleus-Nano Hand Wheel Adapter for Zhiyun Crane 1 Mount your Nucleus-Nano hand wheel to the handle of the Zhiyun Crane 1 with this Nucleus-Nano Hand Wheel Adapter from Tilta. This sturdy aluminum and steel adapter clamps to the Crane's handle and is secured with a locking lever. The hand wheel attaches to the adapter with a screw.
Tilta 14500 Battery Charging Cable for Nucleus-Nano Charge the 14500 batteries that power the Nucleus-Nano with this 14500 Battery Charging Cable from Tilta. The charger plugs into a USB power source and the other end connects positive and negative splitter ends magnetically to a single battery for charging.
Advanced Media is Tilta authorized distributor. Contact Advanced Media Dubai for Tilta Nucleus-Nano Wireless Focus Control System
Tilta Nucleus-Nano Wireless Focus Hand Wheel Controller Tilta 14500 Battery Tilta Nucleus-Nano Wireless Lens Control Motor 0.8 MOD, 32 Pitch, 26-Tooth Gear 15mm Rod Clamp Tilta Baseplate with 15mm LWS Rod Clamp for 95mm Lens Diameter Screw Tilta Aluminum Black Rod (15mm x 100mm) Tilta Nucleus-Nano Handwheel Attachment Plate for DJI Ronin-S/Gravity G2X M6 Screw Tilta Nucleus-Nano Hand Wheel Adapter for Zhiyun Crane 1 Tilta 14500 Battery Charging Cable for Nucleus-Nano Tilta 14500 Battery 5V Micro-USB Motor Power Cable (12") 2 x Follow Focus Lens Gear Ring M4 Allen Wrench M6 Allen Wrench 2 x 1/4"-20 Hex Screw 2 x Rod Mount Hex Screw